POTABLE WATER AND OPEN LOOP HEAT: PEX-B Non-Barrier Tubing, 3/4 Inch, 500 Ft Coil, Blue
POTABLE WATER AND OPEN LOOP HEAT: PEX-B Non-Barrier Tubing, 3/4 Inch, 500 Ft Coil, Blue
Non-barrier tubing, rated for potable drinking water and for open loop radiant heat. Not for closed loop heating systems, which need oxygen barrier pipe.
PEX-B tubing, three quarter inch, 500 foot blue coil. Blue is for identification only, so you can tell your cold runs from your hot at a glance. The pipe is marked every 5 feet.
Dimensions are 0.86 inch outside, 0.66 inch inside, with a 0.1 inch wall. Minimum bend radius is 7 inches, the industry standard for three quarter inch pipe.
Rated from 45 below zero to 230 degrees Fahrenheit. Pressure ratings are 188 to 217 psi at 68 degrees, and 101 to 108 psi at 203 degrees.
Works with crimp, clamp, press, and compression fittings. Suited to residential and commercial hot and cold water distribution, plus open loop radiant floor heat, including structural and non-structural slabs and staple-up between joists.
Meets ASTM F876, ASTM F877, ASTM F2023, and CSA B137.5. Certified to ANSI slash NSF 14, NSF 61, and NSF-Pw. UPC listed by IAPMO. SDR-9 dimensional standard.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.