Shower Curb Overlay Kit, 48 x 72 Inch — PVC Flange, Stainless Grate and Trowel

Highlights

Premium shower tray — A 48 by 72 inch pan made of high-pressure EPS foam board, only 0.8 inch thick. The drain hole sits in the middle with a 4 inch diameter for effective drainage. The tray is pre-sloped at 5 degrees from all four sides toward the center, and comes with a gray water-impermeable membrane surface textured for easy mortar brushing. Light enough to lay under floor tile, and cuttable to fit your space.

Drainage accessories — Includes a durable PVC flange and drainage assist fitting for 2 inch pipe, plus a 304 stainless steel grate with a gravity automatic seal to keep the line clear. Also includes two cuttable shower curbs, 48 by 4-1/2 by 6 inches, made of XPS extruded board so you can trim them to length with a saw blade.

Water impermeable — Two rolls of HDPE water-impermeable membrane, one 5 inch by 32-3/4 foot roll and one 3-1/4 foot by 32-3/4 foot roll, so you can pick the right width for wall or floor. Four inside corners and two outside corners come pre-formed, no cutting required.

Stainless steel trowel — A square-toothed stainless trowel is included for mortar brushing. The serrated blade leaves the mortar surface ridged, which improves adhesion between the membrane and the wall or floor.

Straightforward installation — Everything needed for a watertight shower assembly is in the box: tray, flange, stainless drain, membrane, and curbs. Use an unmodified thinset to install.

Specifications

Flange material: PVC

Shower tray, width by length: 48 by 72 inches

Shower curb, length by width by height: 48 by 4-1/2 by 6 inches

Grate material: 304 stainless steel

Grate size: 4 by 4 inches

Membrane coverage: 121 square feet

What's in the box

One shower tray, two shower curbs, one PVC flange, one flange collar, one drainage assistant, one stainless steel grate, one trowel, four inside corners, two outside corners, two rolls of water-impermeable membrane, and one valve and pipe seal.